If you are spending $20,000 on renovations Eco Design Advisor Nelson Lebo recommends super insulating your ceiling, avoiding too much west facing glazing and planting deciduous trees for shade. This article reviews these options, however, depending on your budget you might want to read about basic or high end cooling options. 

Where is the best place to install your insulation?

The best time to look at effective cooling options is in the design process, and the single best thing you can invest in is insulation, the more the better. Our experts say the roof and the ceiling are key, but if you insulate the walls as well it’s even more effective.

Fiber glass insulated roof

Can I add glazing to cool my home too?

If you are adding or moving glazing, its placement is key as single paned glass can increase the heat in a room by 87%. North-facing positions are the best options for main living areas, and the experts at Your Home suggest avoiding east and west-facing openings because they receive the strongest sun and are the most difficult to shade. 

Single pane glass is not a great insulator so installing double glazing, which works by trapping a layer of air or gas between two panes, is an excellent option. Radiation from the sun is reduced by 70% with single pane glass and 14% with double-glazing. 

Should I install ceiling fans?

According to interior designer Karen Fergusson ceiling fans not only provide cooling they’re very popular in design right now. 

Technically speaking, according to Your Home, at 50% relative humidity, air movement of 0.5m/s creates maximum cooling effect; faster speeds can be unsettling.

“The size of a ceiling fan should fit well with your room size and are best positioned centrally in each space, or in bigger rooms over areas where people spend the most time,” says Karen. Our experts say that adjusting a ceiling fan to run counter-clockwise will create a cooler airflow.

A bedroom with soft blue finishes, large wall windows and a ceiling fan.

Should I install heat pumps to cool my home?

Heat pumps are highly regarded for their energy efficiency after the initial investment. They work on a ‘reverse cycle’ meaning they can heat and cool and use the same technology as your fridge. “A heat pump needs to be the right size for a particular space, and it takes moisture out of the air so it’s dryer,” says Refresh Renovations Dominic Hollands

Smart Homes suggest using the fan only setting to create cross-draughts in your home. “Keep your windows open when using this mode,” they say. If humidity’s the problem use the dehumidifying mode if you have one. It uses less electricity than full cooling mode and you’ll need to shut all of your doors and windows. “Set the thermostat to around 22˚C. The room won't cool down quicker if you set it lower, and you are likely to use more electricity by overcooling.”

Depending on your budget, you might like to read about cooling options with a Basic budget or a High end budget. 

 
Note: prices are rough approximations only, and Refresh Renovations cannot be held accountable for their accuracy. All prices in this article are exclusive of installation costs and any variations.
 

Get in touch if you're thinking about renovating

If you would like to discuss options and ideas for your renovation project, please use the enquiry form alongside to provide us with your contact details. We will get in touch with you at a time that suits you to discuss your project. If you would like to provide us with more information about your project, we have a more comprehensive enquiry form on our "Get in touch" page too.

*Costs are rough estimates and are subject to change. For a fixed-quote accurate to your specific project, please consult your local Refresh Renovations specialist. All Refresh Renovations franchises are independently owned and operated.

All Refresh Renovations franchises are independently owned and operated.

Get in touch

Get in touch if you are interested
in a quote or consultation

Planning Around Supply Shortages
Renovate Handbook Download